When I was a 7-year-old, all I wanted was a Barbie Dream House for Christmas. After what seemed like years of wishing, my dreams finally came true. But then I had this monstrous toy that was basically a piece of furniture in my bedroom. Fun, yes. But practical? Ehhh … not so much.
This year, my daughter requested all kinds of dolls and doll accessories for Christmas, and I began having flashbacks to the ol’ Barbie Dream House. Was this our future? Say it ain’t so!
I didn’t think it was justifiable to add another dollhouse for every scale doll that my kids play with, so I came up with an alternative space-saving solution. A fold-away dollhouse!
Related: Elsie’s Dollhouse Reveal
The OG American Girl doll fans amongst you may remember the “Scenes and Settings” you could buy to play with the 18″ historic character dolls. I had the Samantha one and would spend hours setting up lifestyle scenes with my cousins before one of our parents would take photos as we directed the shots!
I still remember the excitement of getting those photos developed, and cringing at the reflection of the camera flash on the glossy background pages.
Perhaps my background in American Girl doll lifestyle shoot art directing (ha) prepared me for this very moment in time?
I borrowed from the Scenes and Settings idea to create a simple plywood backdrop for my children’s dolls, so when they’re not playing, the dollhouse can be folded up, the furniture and dolls stored in a basket, and everything neatly put away until another day.
There are a lot of options with this project. You can make it in any scale to suit your specific needs, and you can add as much or as little decoration as you’d like!
Some of the supplies shown above ended up unused in my project, but adding shingles or painting bricks may be something I’ll add if I make another one of these fold-away dollhouses one day.
-1/2″ plywood (You only need about 1/4 of a full sheet.)
-hinges for the walls and the front door (The size depends on your scale, but you may need to get shorter screws so they don’t poke through your plywood.)
-basswood trim pieces
-sandpaper (I used 80 grit, 120 grit, and 400 grit.)
-primer + paint
-(optional) painter’s masking tape
–miter shears or sharp scissors
-(optional) paint brushes or sponges
Step One: Have your plywood cut to the size you want each wall of the dollhouse to be. For a 6″ doll, I made my walls 22″x16″. Then use a square or t-square to draw where you want your windows, doors, and roof lines to be.
Step Two: Use a jigsaw to cut out the the shapes you drew in step one. If you need tips for cutting out a hole using a jigsaw, this post by Laura is helpful!
You’ll also need to cut a new piece of wood for your front door. Make it smaller than the opening, because hinges and swinging will make it fit tighter than you expect.
Step Three: Sand down all of your rough edges with a block wrapped with 80 grit sandpaper. I like using sticky-back sandpaper for this reason! After you’ve leveled out any rough edges from the jigsaw, go over everything with 120 grit to make it nice and smooth.
Step Four: Cut pieces of your basswood strips to act as trim around the windows, doors, and “floors.” Glue each piece onto your walls and door using wood glue, then “clamp” the pieces in place with masking tape until the glue has dried.
You could paint your trim separately and glue it on after painting the walls, but I’ve done it both ways and found it easier to just spray paint the whole thing, trim and all, then cut in with paint. If you are stenciling on any kind of pattern, adding trim after painting the walls would be smart.
At this point, you may choose to leave your wood natural and unpainted. If that’s the look you’d like, I’d caution you to keep that in mind when selecting your plywood, because as you can see, my basswood strips are a different hue than the plywood I used, which provides a nice contrast … but not everyone would want that kind of contrast in their finished product.
Also, if you plan to leave your walls and door unpainted, I would definitely seal everything with a few coats of polyurethane. Lightly sand with 400 grit sandpaper after your first coat to ensure the final coats are silky smooth.
Step Five: Prime and paint the walls and door. After one coat of primer, use 400 grit sandpaper to make the surface silky smooth. Then move on to your final paint colors.
I had considered wallpapering the walls with a tiny floral wallpaper, but in the end I decided that the wallpaper would probably end up peeling up with wear and tear, so I kept things as indestructible as possible and just used paint. That was my same reasoning behind not using shingles on the exterior as I had initially planned.
I did use a textured “stone” spray paint on the exterior walls to give the finish a miniaturized stucco feel. It isn’t so noticeable in pictures, but I think it adds a significant touch in person.
Step Six: Add hinges to connect the walls. Make sure to stagger your hinges up or down on either side of the middle wall, or else your screws from each side’s hinges will hit each other and give you lots of grief.
Step Seven: Add hinges to your door. I was worried about being able to maneuver my screwdriver into the tiny door opening in order to screw the hinge into place, but it worked fine to come at the screw at a slight angle. Whew!
Lastly, add some sort of knob to your front door. You can glue on beads, fashion a knob out of polymer clay, or do as I did and simply use a metal push pin on each side of the door.
This simple little dollhouse still feels plenty charming, but it doesn’t have the destructible elements of the fancier dollhouse I made two years ago. Plus it has the added benefit of being space-conscious and portable!
Mini American Girl dolls are easily found for sale online, and they’re the same size as the 6″ Lori dolls.
It’s difficult to find furniture for 6″ dolls, though the Lori brand does have some furnishings available, just not in a style I prefer. I found this well-made vintage Strombecker* furniture on eBay, and other furniture in this scale by searching for “Ginny doll furniture.” (Ginny is a vintage 7 1/2″ doll from the ’50s.)
After I found the furniture, it helped me decide what size to make the rooms in the fold-away dollhouse. This project could easily be adaptable to 1:12 scale—the traditional size for miniatures—which means doll furniture in this scale is available everywhere. Or you could even size it for Barbies or 18″ dolls.
*Not all Strombecker doll furniture is in this scale, so please check measurements before you buy any doll furniture!
I can’t wait for my girls to wake up and find their new dollhouse under the Christmas tree! I won’t have to sneak around after they’re in bed to paint and build it, but that doesn’t mean I won’t still be sneaking to play a little and set up scenes for them to discover in the morning! – Mandi