Go Back
+ servings
Print

Sew Your Own Half Apron

A simple tutorial to make a half apron
Keyword sewing
Servings 1 apron

Equipment

  • sewing machine
  • self-healing cutting mat
  • iron + ironing board
  • fabric scissors
  • pinking shears
  • straight pins

Ingredients

  • 1 piece 16″x36″ cotton fabric for the skirt
  • 2 pieces 12″x12″ contrasting fabric for pockets
  • 1 piece 54″x5″ contrasting fabric for the waistband

Instructions

  • Cut out your 16″x36″ piece of fabric. This will be our skirt piece. As you can see in the photo above, I used my regular scissors for all of the edges except the top edge. I used my pinking shears for this edge.
  • Set your iron to the cotton setting because it’s time to press some edges! We are going to start with the two side edges (the 16″ sections).
  • Fold your side edge over 3/4″ and press. Once your edge is fully ironed, fold the edge a second time and press again. At this point you should see no raw edge. Repeat on the second side.
  • Pin your folded edges in place. It’s time to sew our first straight edge on the sewing machine.
  • Place your fabric onto your sewing machine and lower your presser foot. Remember as you start, you will want to make a stitch and then reverse it with a backstitch to secure the thread on the fabric.
  • Once you have done this, slowly stitch along the edge, removing pins as you go. Guide the fabric with your hand, making sure not to push it into the feed dogs. Continue stitching until you reach the end of your fabric.
  • Before you lift your needle and presser foot, be sure to do one or two backstitches to secure the stitch. Repeat along the second side.
  • Let’s repeat what we just did, but this time along the bottom edge. Use your iron to press 3/4″ and then fold again to press another 3/4″ hem. Take this to your sewing machine and do a straight stitch exactly as you did on the sides.
  • Once you get the bottom edge stitched, it should look like this. We now have two hemmed sides and one hemmed bottom.
  • Cut your 12″x12″ squares. Use your iron to press 3/4″ and then press again. Use your pins to hold your pressed hem in place.
  • I double folded the hem here so that when I stick my hands in the pockets, I have nice, smooth edges instead of frayed edges. If you prefer to single fold, use your pinking shears on the edges.
  • Take both of your squares to your sewing machine. We are only stitching along the top edge of each of these squares.
  • Take your skirt piece and run a basting stitch along the very top edge. Don’t pull the strings yet, we’ll do that soon. Position your pocket squares onto your skirt piece and pin in place.
  • Remember, these are going to be pockets, so the one edge we’ve already stitched on the squares (the top) will not be attached to the skirt
  • Pin them down when you’re satisfied and take it to your machine. Slowly stitch along the left side, bottom, and right side. Repeat on the second pocket.
  • It’s time to pull our basting stitch! When pulling a basting stitch to cinch, it’s important to go slowly and not break the thread.
  • Pull the stitch and work your pleats toward the middle until you are satisfied with your gathers. Tie off each end and pull your pleats so they are distributed evenly.
  • Okay, now that we’ve gotten this far, it’s time to tackle the waistband! Cut out your 54″x 5″ (or longer) piece of contrasting fabric to match the pocket fabric.
  • Lengthwise, fold your piece in half and press with your iron. You should have a nice, crisp crease down the center.
  • Open the fabric up and press a 3/4″ crease into each 54″ edge. We will not be double-folding these edges. On the sides, press a 3/4″ crease. Pin into place.
  • Open up your waistband and let’s play a game of Pac-Man. Your waistband is Pac-Man and your skirt is a ghost. Find the center of your waistband and place the top edge of your skirt inside.
  • Fold the band over and pin in place. Now, let’s take this back to the sewing machine!
  • Start at the short side (the ends) of your waistband and stitch along the edge. Continue around along the bottom edge of the waistband, sewing the skirt portion into the waistband along the way.
  • Continue until you reach the end and stitch the second short edge. Give a little backstitch, and you’re all done!