First, you’ll want to mix up your resin according to the instructions on the package. Add in your glitter until the liquid looks pretty thick with the colors.
Pour your glitter into your molds (no need to grease them or anything beforehand). If you want to do a jump ring diagonally through one of the corners, you can pour your acrylic a little thicker (like 1/2″ thick). But if you want to drill straight down through your letter, you’ll want to make it a little thinner so you can fit the jump ring through the thickness (maybe like 1/4″ thick instead.
Let your mold sit undisturbed for about 24 hours and then you’re ready to pop them out of their mold!
Once your letters are ready, push them out of the mold and admire your work!
I made my letters a little thicker, so I drilled a small hole diagonally through the corners of a letter so I could open up a jump ring and insert it through the hole. You may have to bend the jump ring almost straight to get it in and then re-bend what’s sticking out to be round again. Once your jump rings are attached, you can put your new glitter letter on to your keyring of choice and your DIY is ready to go!
