Okay, okay, unless you’re the type of person who puts up her Christmas tree the day after Halloween (Elsie!!), you may feel it’s still a little early for Christmas decor. My husband Todd is a bit of a Grinch and puts up a big fuss if he hears or sees Christmas-related items before Thanksgiving.
But, I’m a planner by nature, so it’s hard for me not to think of projects I want to do months in advance. So, regardless of when you choose to break out all your holiday decor, if you decide to make this project, I think it will be one of your favorites.
Do you remember those “choose your own adventure” books where the story varies based on what choices you make? Well, this is kind of a choose your own adventure light-up sign. You can make a version of this sign out of foam core that will be faster and more inexpensive (but will probably only last you one year), or you can make a wood version that will take a little more time and money (but you can keep it for several holiday seasons to come).
I like the idea of being able to use my Christmas decor for more than one year (I will for sure be using this light-up sign from last year again!), so I chose to go the wood route.
To bring this sign to life, we’re teaming up with Martha Stewart Living and their holiday collection at The Home Depot. Also, be sure to check out Martha’s light-up sign in her how-to series.
Ready to brighten up your holiday decor??
General supplies:
–Martha Stewart Living Battery-Operated LED lights
–snowflake template
–drill and drill bits (or paddle drill bits)
-duct tape
Additional supplies for wood version:
-wood board big enough for your desired sign size (thickness is up to you; mine is 1/2″ thick)
–jigsaw
Additional supplies for foam core version:
-large foam core boards big enough for your desired sign size
-X-Acto knife, metal ruler, and cutting mat
Step One: TRACE. First you’ll want to trace your snowflake design onto your material. I would suggest taking your downloaded snowflake file to a place like Kinkos or Staples and have it printed on their blueprint printer as large as you want. I wanted a big statement, so I made mine 40″ wide.
It should only cost around $5-$8 and you can just cut it out, place it on your piece of wood or foam core, and trace around it to transfer your design. If you are a lucky duck and have access to a projector, you can also print your snowflake on a transparency to trace it with the projector instead.
I added the dots on the printout to mark where the lights should be based on where I ended up drilling mine, so make sure to mark those dots when you are tracing as well.
Step Two: CUT. Okay, here’s one part of the process where you can go either the less or more time-consuming route. If you want to use foam core for your marquee, you can just use an X-Acto knife and metal ruler to cut out your snowflake. For a thicker foam core sign, cut out more than one and glue them together.
If you choose to use wood for this project instead, you’ll need a jigsaw, but if you don’t already have one the good news is that they are under $50, easy to use, and you’ll have a whole new range of wood DIYs you can tackle from now on. Totally worth it.
If you choose to use a jigsaw, clamp your wood (or have someone hold it) so that the portion of the wood you are cutting hangs over the side of a table or workbench that’s about waist high.
Keep the flat metal bottom of the jigsaw close against the top of the wood as you cut into the board, and use the metal guide on the front of the saw to follow your outline.
Don’t force the saw forward too fast or it won’t give you as clean of a cut, so just let the saw go at its own pace. Make all the cuts that you can get to from the outside of the snowflake, and I’ll show you how to do the cutouts near the inside.
To make a cutout that you can’t get to as easily from the outside edge, you’ll need to make yourself an opening near the lines that you want to cut.
You can see in the photos above that I drilled holes a bit bigger than the width of my jigsaw blade near the lines that were hard to get to so that way I could start the saw from those holes and go in either direction I needed to from there.
Once your snowflake is cut, you can take a piece of fine sandpaper and smooth any rough edges.
Step Three: DRILL. To make your light holes, use a drill bit or a paddle bit that makes a hole big enough to fit your lights through (my bit was 1/2″).
A regular drill bit will work just fine for either wood or foam core, but paddle bits tend to give the cleanest holes in wood if you have access to one. Just drill with the paddle bit until the tip just goes through the other side, and then flip the wood and finish drilling the hole from the back.
Step Four: PAINT. You guys know how to do this step. Choose whatever color you like (spray painting is an option too) or add a glitter coat with Mod Podge so the lights have extra sparkle.
Step Five: ADD LIGHTS. I love these Martha Stewart LED lights because they run on battery packs and you don’t have to worry about cords hanging down or having to be near an outlet.
They are also great because the front bulb cover can be removed and you can just stick the bulb through from the back and reattach the cover from the front. And the larger bulb really just works for the look I’m going for here.
There’s not really a right or wrong place to start adding the lights in from the back, so just pick a spot and start adding! It’s also okay if you have to skip a bulb to make it to the next hole if the spacing is too far apart on some. I think light-up signs actually look better when they have a few lights behind the sign, as they give it an extra glow against the wall.
Use duct tape on the back of the sign to secure any loose lights or wires that might dangle in sight and to secure the battery packs.
Marquee signs really are the best in my book and we’ve done quite a few of them now if you want to make another one! Can’t you image being cuddled up under this sign with a blanket and hot chocolate this winter? It looks so cute on the mantel with some gold figurines and Christmas decorations.
It’s the perfect dose of quirky fun to add to your holiday decor, and since the snowflake is also a general winter icon, you can totally leave it up until spring has sprung. Are you up for making a holiday marquee this year? Would you choose the wood or foam core version? xo. Laura
Credits // Author: Laura Gummerman. Photos by: Laura Gummerman and Josh Rhodes.
-Before purchasing your lights, check for a label of an independent testing laboratory (most commercially sold Christmas lights will have this). Some lights are specially made for indoor or outdoor use; be sure to use lights made for indoor use.
-Replace any string of lights with worn or broken cords, or loose/broken lights.
-Your finished project should not have any exposed bundles of cords or wires, only the final cord or extension cord so it can safely reach an outlet if you use lights that are plugged in.
-Just as you would with your house decorations or your Christmas tree, always turn off lights before leaving your home or going to bed.
How make strings of the Martha Stewart lights did you use on the 40″ snowflake?
Where do I find the instructions for the faux green fireplace? Thank you!
Hi! Here’s the link— https://abeautifulmess.com/faux-fireplace-surround/
Where can I get those lights? Can’t find them anywhere! Thankbyou
do you have a link for the snowflake design to be printed at kinkos?
There’s a PDF of the design in the supply list 🙂
Hi Amy! It should take you to this PDF link: http://abeautifulmess.typepad.com/files/snowflake.pdf
You can print it from there 🙂 -Jacki
Love Love Love your blog and this idea!
I tried right clicking on the image of the snowflake and it isn’t an option to save the image or download it. am I doing something wrong?
Love the snowflake marquee! Had to pin it.
Hi! Can you tell me what size drill bit you used? I can’t seem to find the right size to fit the Martha Stewart lights! Thanks!
I’ve just finished making this yesterday. My first DIY project and I loved it. I made mine a lot smaller though and added an extra hole at the top to put a ribbon through so it can hang on the wall. It looks amazing especially since the wall is brown, it makes the white and lights of the snowflake pop. So happy with it!!
I’m actually making this right now. Loved it so much that I had to try for myself. Making it a lot smaller though so I can easily fit it somewhere on the wall. Also this is my very first DIY project and my dad had to teach me to use a jigsaw and a drill, haha. But I love it!
This is amazing. My favorite thing about Christmas decor is things that light up! Must make.
Question: what size drill bit did you use?
Love this. Added items to my home depot list. Can you tell me how many sets of lights?
Wow great job! It looks amazing – if only I were that talented 🙂
Cristina
http://simplysophisticatedevents.blogspot.ca/
What a great idea. That is a fun way to add some festive wall decor for the holidays
http://wallcoverings2u.com/
Everything about this is perfect! Great job 🙂
-Taylor
porch.com
That is the coolest fireplace EVER.
100% YES. I LOVE THIS SO MUCH.
I love this! I made the Merry & Bright Marquee last year using foam since I don’t have access to many tools. Luckily it’s still holding up really well and I’ve already brought it out for this holiday season too 🙂 Maybe I’ll have to make it a snowflake friend!
Sarah
thesurznickcommonroom.com
I love this so much! Just wish I knew how to use power tools…but great project. Can’t wait for more!
Alright… It’s on my list! Thanks! X