Epoxy resin is a hard, plastic-like substance (polymer or prepolymer) that contains epoxide. Typically, the resin is mixed with a hardener or curative which creates a chemical reaction and causes the mixture to cure or harden.
Epoxy resin can be bought in all sorts of different crafting kits, as well as used in larger home projects or even industrial projects. But for this post, I’m mainly focused on resin art or craft projects that can be made from epoxy resin.
Resin art is any art or craft project made with epoxy that is colored or has objects added to it (encased in it) and serves an aesthetic purpose which could range from a coffee table to earrings.
We’ve shared LOTS of epoxy resin projects on this blog over the years, so I wanted to put together a beginner’s guide with all the information someone might want to get started.
Related: Looking for more DIY projects? Check out How to Tie-Dye – Beginner’s Guide and our crafts archive for years and years of great craft projects.
Table of Contents
Here is a video on how to use epoxy resin:
Supplies
- Epoxy Resin crystal clear kit
- measuring cup – disposable, or for this project use only (not from your kitchen)
- molds – for this project, I used these silicone ornament molds
- elements – pressed leaves or flowers, glitter, coins, small photos, etc.
- disposable gloves
I also used some hair from my son’s first haircut for this project. I wanted to save some of his first locks in a Christmas ornament as a keepsake.
Best Epoxy Resin Products for Crafting
- Jewelry/Small Project Kit – we’ve bought this so many times over the years! It’s easy to use and comes with all the basics you’ll need other than molds.
- Larger Project Kit – for those who want to make lots of small projects or something larger like a coffee table or desk surface.
- Coaster molds – this set also comes with a coaster storage box mold.
- Jewelry molds – for jewelry molds, I prefer ones that include a hole for adding a jump ring or other jewelry finishing.
- Kitchen torch – great for getting bubbles out, especially for larger pieces. Also you can use this for creme brûlée.
How to Use Epoxy Resin
- Prepare your work area and molds. You want to make sure the molds are clean and you have protected any work surfaces in case of supplies.
- Mix together the epoxy resin and hardener. Most kits will have you measure 1:1, but check the directions on your resin products to make sure.
- Add the elements and fill the molds with the resin mixture.
- Use toothpicks to arrange or push elements into the resin more. You can sometimes also pop any bubbles that form in your resin with the toothpicks.
- Allow the project to fully cure; usually this takes 10-24 hours depending on your resin product, so check the instructions.
- Remove your objects from their molds. You can further decorate, like adding ribbon to the ornaments, etc.
Epoxy Resin Projects
- DIY Epoxy Resin Coffee Table – I sealed photos and agate slices, but you could do pennies if you want that classic look
- Glitter Coasters
- DIY Faux Terrazzo Countertops – a larger scale project with an epoxy resin seal
- DIY Epoxy Resin Jewelry – with glitter and sprinkles
- Colorful Epoxy-Topped Desk
- Epoxy Jewelry Box – a fun gift idea
- Alcohol Ink Resin Coasters – so fun and colorful!
- Daisy DIY Earrings
- Glitter Letter Keychain
- Epoxy Statement Necklace – with photos
What are the Different Types of Resin?
- Epoxy – The best object for craft and smaller home projects, especially for beginners. It has a low odor. Once mixed, you’ll have a short amount of time to cast your pieces (usually 20 minutes or less) and the epoxy usually cures within 24 hours.
- Polyester – Higher odor but cures very hard. A good option if you want something that cures hard enough that you can sand it.
- Polyurethane – More sensitive but cures very quickly. If you want a resin that cures (hardens) fast, this is the best option.
Tips for Success
- Prepare work pieces – have everything ready to go before you mix your resin.
- Prepare work space – cover surfaces with scrap paper or a drop cloth and make sure your molds or other supplies are dust and debris free; otherwise, the dust may get stuck in your resin forever.
- Wear gloves and consider protective eyewear, especially if you’re working with larger pieces. You may also want to work in a well ventilated area or outdoors, but have a way to cover or protect your project as it cures from weather.
- A heat gun or kitchen torch is the best way to remove bubbles from larger surfaces. If your project is smaller, like jewelry pieces, you can use a toothpick to remove bubbles.
Frequently Asked Questions
Is resin art expensive?
Not really. Resin art can be relatively inexpensive, especially if you are working on smaller projects like coasters or jewelry. Larger projects that require more epoxy resin and other supplies may become more expensive.
Is resin art difficult?
No, anyone can have success with resin art projects. If you are working on a resin art project with children though, take care they are fully supervised as there are chemicals involved.
Can you paint on epoxy resin?
Yes. Most epoxy resin can be painted after it cures, although there are different kinds, so check your product description. You can also tint the resin with paint.
What questions do you have about resin art? What projects are you going to try?
Love this post? Sign up for our newsletter for more ideas!
Get creative ideas for recipes, crafts, decor, and more in your inbox!
Get the How-To
Supplies
- 1 Epoxy Resin crystal clear kit
- 1 measuring cup
- pressed flowers or plants
- 1 pair disposable gloves
Instructions
- Prepare your work area and molds. You want to make sure the molds are clean and you have protected any work surfaces in case of supplies.
- Mix together the epoxy resin and hardener. Most kits will have you measure 1:1, but check the directions on your resin products to make sure.
- Add the elements and fill the molds with the resin mixture.
- Use toothpicks to arrange or push elements into the resin more. You can sometimes also pop any bubbles that form in your resin with the toothpicks.
- Allow the project to fully cure; usually this takes 10-24 hours depending on your resin product, so check the instructions.
- Remove your objects from their molds. You can further decorate, like adding ribbon to the ornaments, etc.
Notes
- I also used some hair from my son’s first haircut for this project. I wanted to save some of his first locks in a Christmas ornament as a keepsake.
I would love to make the gnome statue what all do I need
I was wondering if epoxy and sand were ok together because we have a beach project that we are doing for a bathroom
You ladies have been an inspiration over the years and I really want to thank you for being open and sharing the goods!
Really excited to try this with some dried flowers. Do you recommend pouring some resin first, placing an object, and then topping it? Or will the object still get coated if I place it first and then pour the resin?
I love resin! But I think you should mention a ventilated mask is important when you work eith resin and wlso not to use in in areas where you, your kids or animals are. Resin is not good to breath in. Or get on your skin.
Glad someone brought that up. Long-term exposure can cause serious respiratory illness and disability (I know an older artist who worked with resin for most of her life without proper protection and is now disabled from it). Play safe!
Super helpful and thorough – thanks!!!