Print
Resin Art - Beginner's Guide
how to create ornaments or coasters with epoxy resin
Keyword diy projects, epoxy, epoxy diy
Prep Time 5 minutes minutes
Cook Time 5 minutes minutes
Cure time 12 hours hours
Total Time 12 hours hours 10 minutes minutes
Prepare your work area and molds. You want to make sure the molds are clean and you have protected any work surfaces in case of supplies.
Mix together the epoxy resin and hardener. Most kits will have you measure 1:1, but check the directions on your resin products to make sure.
Add the elements and fill the molds with the resin mixture.
Use toothpicks to arrange or push elements into the resin more. You can sometimes also pop any bubbles that form in your resin with the toothpicks.
Allow the project to fully cure; usually this takes 10-24 hours depending on your resin product, so check the instructions.
Remove your objects from their molds. You can further decorate, like adding ribbon to the ornaments, etc.
- I also used some hair from my son’s first haircut for this project. I wanted to save some of his first locks in a Christmas ornament as a keepsake.